New Release 0.6.4!

Hi everyone,

just in time for the season we deliver a new release to play with over the holidays. Even though it’s a minor release it comes with a lot of nifty new features:

  • The new parts bin navigation lets you easily browse through your part bins and has dedicated bins for some popular manufacturers.
  • Fritzing got much faster - especially on the Mac! We owe this speed improvement to the wonderful folks at Qt, who released the new version 4.8.
  • Parts can now be rotated freely in breadboard and pcb view. Just hover a selected part over a corner, then drag around.
  • Our generic ICs now provide a dedicated pin label editor to make it easier to create custom ICs. You can find it in the inspector window.
  • On your PCB, you now can decide if you like to have a ground fill (empty spaces are filled with copper connected to the GND) or just a copper fill (not connected).
  • In preparation for the new Super Upgrade Kit you can find new example circuits for 7 segment displays, shift registers, rotary encoders and much more.
  • Lots of new parts from parkFun (thanks Lionel, Nathan, Ryan, Robert), Snootlab (thanks Lionel and Lionel), from the Fritzing team (shrouded pin headers, ECB transistors, 3mm LEDs, Superflux LEDs, 5 band resistors, the Atmega 2560, SSOP 28 footprint, rotary encoder). We also finally managed to include some of the wonderful community contributed parts (fuse, low dropout voltage regulator, Atmega644, HCF 4067, RTC breakout, HEF 4094, RGB 3W Star, DB-25 connector). Thanks to Johan, Macgyveremir, Forvellos, Mike, SorkiG, Niclas, Kungfumachinist.
  • An updated Portugues translation -thanks Nuno!

Give it a spin!

Your little Fritzing elves

New examples

New parts bin navigation

New parts

New pin label editor